Glaco Advance Bundle
- Vendor: SOFT99USA
- SKU: 10309-10308-RQ-04957-10310-OP
- Category: Car Care Products, Featured Products, Glass & Mirror, Special Bundles
The Glaco Advance Bundle includes the more advanced essentials to start your water-repellent journey for your windshield and side mirrors or any glass surfaces. Get the most bang for your buck with this adanve bundle.
Glaco Glass Compound Roll On [REQUIRED]
Using two types of abrasive, this convenient handheld glass compounder easily removes the toughest stains, traffic film, etc. It can remove old Glaco Ultra and is the perfect surface preparation before glass coating. The built-in felt pad means there is no need for any other sponges or cloths. Simple!
| Name of product | Glaco Glass Compound Roll On |
|---|---|
| JAN code | 4975759103087 |
| Content | 100ml |
| Ingredients and materials | Abrasive materials |
How to use the product
- Rinse and dry the glass to be treated.
- Shake well, then remove the cap and plastic seal.
- Press onto the glass and squeeze gently to release the compound.
- Use the felt head to polish the glass until water-repellency is completely gone.
- Rinse well with water.
Glaco Mirror Coat Zero [REQUIRED]
This novel coating leaves the side mirror coated with a layer of microscopic silica crystals, to give it an ultra-hydrophobic surface that simply cannot be wetted. Water literally bounces off!
| Name of product | Glaco Mirror Coat Zero |
|---|---|
| JAN code | 4975759103097 |
| Content | 40ml |
| Ingredients and materials | Alcohols, silica |
| Storage and disposal methods | STORE SEALED BELOW 40℃, OUT OF DIRECT SUNLIGHT. AVOID HUMIDITY, FREEZING, AND WETTING. USE/RELEASE CONTENTS COMPLETELY BEFORE DISPOSING ACCORDING TO LOCAL REGULATIONS. |
How to use the product
Note: Apply only to a thoroughly cleaned and dried mirror.
- Spray evenly onto the mirror from around 15 cm away. Work spraying continuously side-to-side, from top-to-bottom, to wet the whole mirror. Do not apply more than necessary.
- Allow to dry completely before use (1 hour in summer, 2 hours in winter).
Note: DO NOT TOUCH or wipe the coated mirror, as it will destroy the coating.
Glaco DX [OPTION 1]
The most powerfully repellent glass coating in the Glaco series! This new formulation is even easier to apply! This is the next generation of Glaco!
Using the newly developed S.A.R.F. (Strong Adhesion + Rapid Finish) technology, the latest generation of Glaco creates an ultra-smooth layer that pushes away rain more powerfully than ever before... and it lasts for 4 months!
The swivel-head and large, square application felt allow for much easier application and make sure the corners get a proper coat.
Also repels traffic film, snow, and frost!
| Name of product | Glaco DX |
|---|---|
| JAN code | 4975759049579 |
| Content | 110ml |
| Ingredients and materials | Alcohols, siloxanes, acids |
| Storage and disposal methods |
STORE BELOW 40℃, OUT OF DIRECT SUNLIGHT. |
How to use the product
Unscrew the cap and remove it.
1. Press onto the glass and gently squeeze to release the liquid, allowing it to soak into the felt head.
Incomplete removal may lead to a wiper judder.
Ultra Glaco [OPTION 2]
Making use of Fusso technology, Ultra Glaco increases durability to 6 times longer than standard glass coatings! Resistant to wipers, dust, oil, car washes, and detergent, the water-repellency lasts up to one year!
| Name of product | Ultra Glaco |
|---|---|
| JAN code | 4975759103103 |
| Content | 70ml |
| Ingredients and materials | Fluorine-based water repellent, acid, isopropyl alcohol |
| Storage and disposal methods | STORE SEALED BELOW 40℃, OUT OF DIRECT SUNLIGHT. AVOID HUMIDITY, FREEZING, AND WETTING.USE/RELEASE CONTENTS COMPLETELY BEFORE DISPOSING ACCORDING TO LOCAL REGULATIONS. |
How to use the product
Note: Apply only to clean and dry glass.
1. Remove the cap, press the felt applicator onto the glass, and gently squeeze the bottle to let out some liquid.
2. Use the felt applicator to rub the liquid firmly into the glass. Be sure to get complete coverage.
3. After drying for 5-10 minutes, wipe off the residue with a dry clean microfiber/cloth. Keep dry for 12 hours for maximum effect and durability.
The Glaco Advance Bundle includes the more advanced essentials to start your water-repellent journey for your windshield and side mirrors or any glass surfaces. Get the most bang for your buck with this adanve bundle.
Glaco Glass Compound Roll On [REQUIRED]
Using two types of abrasive, this convenient handheld glass compounder easily removes the toughest stains, traffic film, etc. It can remove old Glaco Ultra and is the perfect surface preparation before glass coating. The built-in felt pad means there is no need for any other sponges or cloths. Simple!
| Name of product | Glaco Glass Compound Roll On |
|---|---|
| JAN code | 4975759103087 |
| Content | 100ml |
| Ingredients and materials | Abrasive materials |
How to use the product
- Rinse and dry the glass to be treated.
- Shake well, then remove the cap and plastic seal.
- Press onto the glass and squeeze gently to release the compound.
- Use the felt head to polish the glass until water-repellency is completely gone.
- Rinse well with water.
Glaco Mirror Coat Zero [REQUIRED]
This novel coating leaves the side mirror coated with a layer of microscopic silica crystals, to give it an ultra-hydrophobic surface that simply cannot be wetted. Water literally bounces off!
| Name of product | Glaco Mirror Coat Zero |
|---|---|
| JAN code | 4975759103097 |
| Content | 40ml |
| Ingredients and materials | Alcohols, silica |
| Storage and disposal methods | STORE SEALED BELOW 40℃, OUT OF DIRECT SUNLIGHT. AVOID HUMIDITY, FREEZING, AND WETTING. USE/RELEASE CONTENTS COMPLETELY BEFORE DISPOSING ACCORDING TO LOCAL REGULATIONS. |
How to use the product
Note: Apply only to a thoroughly cleaned and dried mirror.
- Spray evenly onto the mirror from around 15 cm away. Work spraying continuously side-to-side, from top-to-bottom, to wet the whole mirror. Do not apply more than necessary.
- Allow to dry completely before use (1 hour in summer, 2 hours in winter).
Note: DO NOT TOUCH or wipe the coated mirror, as it will destroy the coating.
Glaco DX [OPTION 1]
The most powerfully repellent glass coating in the Glaco series! This new formulation is even easier to apply! This is the next generation of Glaco!
Using the newly developed S.A.R.F. (Strong Adhesion + Rapid Finish) technology, the latest generation of Glaco creates an ultra-smooth layer that pushes away rain more powerfully than ever before... and it lasts for 4 months!
The swivel-head and large, square application felt allow for much easier application and make sure the corners get a proper coat.
Also repels traffic film, snow, and frost!
| Name of product | Glaco DX |
|---|---|
| JAN code | 4975759049579 |
| Content | 110ml |
| Ingredients and materials | Alcohols, siloxanes, acids |
| Storage and disposal methods |
STORE BELOW 40℃, OUT OF DIRECT SUNLIGHT. |
How to use the product
Wash away dirt and dust, and dry completely before application.Unscrew the cap and remove it.
1. Press onto the glass and gently squeeze to release the liquid, allowing it to soak into the felt head. 2. Apply to the glass in a criss-cross pattern, squeezing to release more liquid as necessary. Leave no gaps. 3. Dry for 5-10 minutes, and wipe up with a tightly wrung-out damp towel.
Incomplete removal may lead to a wiper judder.
Ultra Glaco [OPTION 2]
Making use of Fusso technology, Ultra Glaco increases durability to 6 times longer than standard glass coatings! Resistant to wipers, dust, oil, car washes, and detergent, the water-repellency lasts up to one year!
| Name of product | Ultra Glaco |
|---|---|
| JAN code | 4975759103103 |
| Content | 70ml |
| Ingredients and materials | Fluorine-based water repellent, acid, isopropyl alcohol |
| Storage and disposal methods | STORE SEALED BELOW 40℃, OUT OF DIRECT SUNLIGHT. AVOID HUMIDITY, FREEZING, AND WETTING.USE/RELEASE CONTENTS COMPLETELY BEFORE DISPOSING ACCORDING TO LOCAL REGULATIONS. |
How to use the product
Note: Apply only to clean and dry glass.
1. Remove the cap, press the felt applicator onto the glass, and gently squeeze the bottle to let out some liquid.
2. Use the felt applicator to rub the liquid firmly into the glass. Be sure to get complete coverage.
3. After drying for 5-10 minutes, wipe off the residue with a dry clean microfiber/cloth. Keep dry for 12 hours for maximum effect and durability.
