Rain Drop Tornado Vortex 300ml – Express Spray Coating for Paint & Glass Protection
- Vendor: SOFT99USA
- SKU: 00536
- Category: Car Care Products, Coating & Waxing, Featured Products, Glass & Mirror ...
RAIN DROP TORNADO VORTEX – EXPRESS COATING FOR BODY AND GLASS
Rain Drop Tornado Vortex represents the next generation of instant spray coatings, building on the success of the original Rain Drop “Bazooka” system. Equipped with the newly developed Tornado Vortex Head (TV Head), it delivers faster, easier, and more uniform application than ever before.
With just a simple spray and wipe, the formula activates the advanced G-RAS Shield Effect, creating a durable protective layer across both bodywork and glass. On painted surfaces, it provides up to 5 months of deep gloss enhancement and powerful hydrophobic protection, keeping the finish looking freshly detailed while repelling dirt and water. On glass, it ensures up to 3 months of outstanding rain repellence, dramatically improving visibility and driving safety in wet conditions.
Designed for ultimate convenience without compromising on performance, Rain Drop Tornado Vortex is the all-in-one solution for achieving a showroom shine and long-lasting protection in record time.
LARGE VOLUME REPLACEMENT CARTRIDGE AVAILABLE
When the canister runs out, there’s no need to discard the Rain Drop Tornado Vortex Head. Simply detach the TV Head and attach it to a large-volume refill cartridge. This system not only reduces waste but also provides a cost-effective and eco-friendly way to keep enjoying the speed and convenience of Rain Drop Tornado Vortex without interruption. AVAILABLE SEPARATELY HERE
| Name of product | Rain Drop Tornado Vortex 300ml |
|---|---|
| JAN code | 4975759005360 |
| Content | 300ml |
| Ingredients and materials | Silicones, silicon resins, alcohols |
| Storage and disposal methods |
After use, wipe the liquid from the spray nozzle. Store in a cool, dry place, away from direct sunlight, high temperatures (above 40℃), freezing temperatures, inside vehicles, and areas where rust is likely to occur. When disposing of the product, use the entire contents. Spray the remaining gas away from flames in an outdoor area and then dispose of it according to local regulations. |
RAIN DROP TORNADO VORTEX – EXPRESS COATING FOR BODY AND GLASS
Rain Drop Tornado Vortex represents the next generation of instant spray coatings, building on the success of the original Rain Drop “Bazooka” system. Equipped with the newly developed Tornado Vortex Head (TV Head), it delivers faster, easier, and more uniform application than ever before.
With just a simple spray and wipe, the formula activates the advanced G-RAS Shield Effect, creating a durable protective layer across both bodywork and glass. On painted surfaces, it provides up to 5 months of deep gloss enhancement and powerful hydrophobic protection, keeping the finish looking freshly detailed while repelling dirt and water. On glass, it ensures up to 3 months of outstanding rain repellence, dramatically improving visibility and driving safety in wet conditions.
Designed for ultimate convenience without compromising on performance, Rain Drop Tornado Vortex is the all-in-one solution for achieving a showroom shine and long-lasting protection in record time.
LARGE VOLUME REPLACEMENT CARTRIDGE AVAILABLE
When the canister runs out, there’s no need to discard the Rain Drop Tornado Vortex Head. Simply detach the TV Head and attach it to a large-volume refill cartridge. This system not only reduces waste but also provides a cost-effective and eco-friendly way to keep enjoying the speed and convenience of Rain Drop Tornado Vortex without interruption. AVAILABLE SEPARATELY HERE
| Name of product | Rain Drop Tornado Vortex 300ml |
|---|---|
| JAN code | 4975759005360 |
| Content | 300ml |
| Ingredients and materials | Silicones, silicon resins, alcohols |
| Storage and disposal methods |
After use, wipe the liquid from the spray nozzle. Store in a cool, dry place, away from direct sunlight, high temperatures (above 40℃), freezing temperatures, inside vehicles, and areas where rust is likely to occur. When disposing of the product, use the entire contents. Spray the remaining gas away from flames in an outdoor area and then dispose of it according to local regulations. |
2. While locked, shake the can 20 times before spraying evenly onto the wet surface, about 2 seconds per square meter. Wipe up immediately with a clean, dry microfiber cloth, refolding as necessary.
NOTE: Apply the glass to the body before the paint. If unevenness occurs, thoroughly wash and wring out a microfiber cloth, then repeat the wiping process. When using on a dry surface, wet and wring out the cloth before use. When applying to the grill or wheels, spray onto the cloth and wipe the surface. After application, avoid wetting for 1 hour in summer, or 24 hours in winter, to improve coating performance. In hot conditions [above 95 °F (35℃)], cool the can in water for a few minutes before use. In cold conditions, warm water can be used tepidly before use.
Use only for the intended purpose.
Check the vehicle's instruction manual before use.
In winter or when the spray power is weak, soak the can in lukewarm water (35°C or less) for several minutes before use. DO NOT heat with flame, hot water, hair dryer, etc.
Use in a well-ventilated area.
Do not use in strong winds, dusty areas, or in hot weather with temperatures of 35°C or higher.
Do not leave liquid on the surface for extended periods, as it may cause stains and unevenness.
Do not pull or apply excessive force to the rotating tube, as it may be damaged.
Do not scrub with excessive force, as it may cause scratches. Do not use on interior glass or other parts inside the car.
Do not spray toward the human body.
Wash your hands thoroughly with soap after use.
[Precautions when using on the body]
When using on a repainted car or a deteriorated body, test in an inconspicuous place before using.
Sufficient effect may not be obtained depending on the condition of the paint or coating.
Do not use on matte paint or matte wrap.
[Precautions when using on glass]
In cold conditions, work while warming the glass with the heater or defogger.
Remove other glass coatings before use.
Do not use on specially treated mirrors or glass, such as colored, anti-glare, water-repellent, hydrophilic, or ultrasonic parts.
Please be aware that if the humidity is high and there is a significant temperature difference between the inside and outside of the car, the wipers may cause the water-repellent coating to become uneven, depending on the conditions and duration of use, which can make it difficult to see ahead. Re-apply if necessary.
Do not use traffic film removal washer fluid. Use only water or water-repellent washer fluid (e.g., Glaco).
If the wiper rubber has deteriorated, the wipers may judder. Replace with new wipers.
If you have a professionally coated vehicle, please check with the workshop before use.
Do not inhale or drink: Harmful to the human body.
People with sensitive skin may suffer an allergic reaction. Wear protective gloves.
Do not store in direct sunlight or in a car with temperatures above 40°C. Risk of explosion.
Keep away from fire.
Keep out of reach of children and vulnerable people.
If swallowed, do not induce vomiting. Seek medical advice immediately.
If in the eyes, rinse with clean water for at least 15 minutes. If symptoms persist, consult a doctor.
If on skin, wash thoroughly with clean water. If symptoms persist, consult a doctor.
If feeling unwell, stop use immediately. If symptoms persist, consult a doctor.
Download SDS: Click here to view
