Designed specifically for motorcycle helmets, the quick and easy application make this product convenient to use, even in the event of sudden rain. Rain slides off even at low speeds (e.g. 30 km/h) - useful in and out of town. Does not simply repel, but promotes sliding action to clear field of vision. Unique formula can be applied dry or even when wet; perfect for sudden rain. It can be applied with a simple tissue - so no need for washing or storage of cloths or towels. Simple spray and wipe application takes only a few seconds. Can be used on bike windshields, headlights, goggles, etc.
As a bonus, Rain Burst also fills marring and minor scratches to reduce glare and actually improve the clarity of worn visors!
| Name of product | Rain Burst |
|---|---|
| JAN code | 4975759049562 |
| Content | 70ml |
| Ingredients and materials | Petrochemical solvents, silicone resin, silicone oil |
How to use the Product
- Use only with helmet removed. Do not use while wearing the helmet.
-
Usage when dry:
Clean the helmet according to the manufacturer's instructions. - Close the visor and spray from about 5 cm away, for around one second, from left edge to right edge.
- Spread around the liquid with a tissue to cover the whole surface.
- Wait for the liquid to dry (20-60 seconds) before wiping clear with another tissue.
-
In the case of unevenness, wipe once more with a fresh tissue.
Do not use wet wipes, moisturizing tissues, towels, or microfiber cloths. - Usage when wet: Close the visor and spray without drying from about 5 cm away, for around one second, from left edge to right edge.
-
Quickly spread around the liquid with a tissue to cover the whole surface.
In the case of unevenness, wipe once more with a fresh tissue.
Do not use wet wipes, moisturizing tissues, towels, or microfiber cloths.
Precautions for Use
- USE ONLY FOR INTENDED PURPOSE.
- USE ONLY IN WELL-VENTILATED AREAS.
- DO NOT USE WHILE DRIVING.
- DO NOT USE IN DIRECT SUNLIGHT OR ON HOT SURFACES.
- DO NOT USE WHILE WEARING HELMET.
- AVOID CONTACT WITH OTHER SURFACES. MAY CAUSE STAINING OR DEFORMATION. IF CONTACT OCCURS, WIPE OFF IMMEDIATELY WITH A DAMP TOWEL.
- DO NOT LEAVE FOR EXCESSIVELY LONG PERIODS. MAY CAUSE STAINING OR DEGRADATION.
- DO NOT USE SANDY PAPER. MAY CAUSE SCRATCHES.
- DO NOT SCRUB WITH EXCESSIVE FORCE. MAY CAUSE SCRATCHES.
- WHEN USING FOR THE FIRST TIME, TRAFFIC FILM, DIRT, OR OTHER COATINGS MAY PREVENT FULL EFFECT. CONSULT HELMET MANUAL FOR PROPER MAINTENANCE PROCEDURES TO CLEAN SURFACE.
- AFTER APPLICATION, CHECK VISIBILITY BEFORE RIDING.
- IN CERTAIN CONDITIONS OF SUDDEN CHANGES IN TEMPERATURE/HUMIDITY, VISOR MAY CLOUD. TAKE CARE, AND OPEN VISOR.
AFTER A PERIOD OF USE, HYDROPHOBIC EFFECT WILL BECOME UNEVEN. IN THIS CASE, REAPPLY. - WASH HANDS WELL WITH SOAP AFTER USE.
- DO NOT USE ON SPECIALLY-COATED VISORS.
- TEST ON AN INCONSPICUOUS AREA BEFORE USE.
Warnings and General Notes
- DO NOT EAT OR INHALE. HARMFUL.
- AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
- RISK OF RUPTURE. KEEP BELOW 40℃ AND OUT OF DIRECT SUNLIGHT.
- FLAMMABLE. KEEP AWAY FROM HEAT AND FIRE.
- DO NOT SPRAY TOWARDS PEOPLE.
- KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.
Designed specifically for motorcycle helmets, the quick and easy application make this product convenient to use, even in the event of sudden rain. Rain slides off even at low speeds (e.g. 30 km/h) - useful in and out of town. Does not simply repel, but promotes sliding action to clear field of vision. Unique formula can be applied dry or even when wet; perfect for sudden rain. It can be applied with a simple tissue - so no need for washing or storage of cloths or towels. Simple spray and wipe application takes only a few seconds. Can be used on bike windshields, headlights, goggles, etc.
As a bonus, Rain Burst also fills marring and minor scratches to reduce glare and actually improve the clarity of worn visors!
| Name of product | Rain Burst |
|---|---|
| JAN code | 4975759049562 |
| Content | 70ml |
| Ingredients and materials | Petrochemical solvents, silicone resin, silicone oil |
- Use only with helmet removed. Do not use while wearing the helmet.
-
Usage when dry:
Clean the helmet according to the manufacturer's instructions. - Close the visor and spray from about 5 cm away, for around one second, from left edge to right edge.
- Spread around the liquid with a tissue to cover the whole surface.
- Wait for the liquid to dry (20-60 seconds) before wiping clear with another tissue.
-
In the case of unevenness, wipe once more with a fresh tissue.
Do not use wet wipes, moisturizing tissues, towels, or microfiber cloths. - Usage when wet: Close the visor and spray without drying from about 5 cm away, for around one second, from left edge to right edge.
-
Quickly spread around the liquid with a tissue to cover the whole surface.
In the case of unevenness, wipe once more with a fresh tissue.
Do not use wet wipes, moisturizing tissues, towels, or microfiber cloths.
- USE ONLY FOR INTENDED PURPOSE.
- USE ONLY IN WELL-VENTILATED AREAS.
- DO NOT USE WHILE DRIVING.
- DO NOT USE IN DIRECT SUNLIGHT OR ON HOT SURFACES.
- DO NOT USE WHILE WEARING HELMET.
- AVOID CONTACT WITH OTHER SURFACES. MAY CAUSE STAINING OR DEFORMATION. IF CONTACT OCCURS, WIPE OFF IMMEDIATELY WITH A DAMP TOWEL.
- DO NOT LEAVE FOR EXCESSIVELY LONG PERIODS. MAY CAUSE STAINING OR DEGRADATION.
- DO NOT USE SANDY PAPER. MAY CAUSE SCRATCHES.
- DO NOT SCRUB WITH EXCESSIVE FORCE. MAY CAUSE SCRATCHES.
- WHEN USING FOR THE FIRST TIME, TRAFFIC FILM, DIRT, OR OTHER COATINGS MAY PREVENT FULL EFFECT. CONSULT HELMET MANUAL FOR PROPER MAINTENANCE PROCEDURES TO CLEAN SURFACE.
- AFTER APPLICATION, CHECK VISIBILITY BEFORE RIDING.
- IN CERTAIN CONDITIONS OF SUDDEN CHANGES IN TEMPERATURE/HUMIDITY, VISOR MAY CLOUD. TAKE CARE, AND OPEN VISOR.
AFTER A PERIOD OF USE, HYDROPHOBIC EFFECT WILL BECOME UNEVEN. IN THIS CASE, REAPPLY. - WASH HANDS WELL WITH SOAP AFTER USE.
- DO NOT USE ON SPECIALLY-COATED VISORS.
- TEST ON AN INCONSPICUOUS AREA BEFORE USE.
- DO NOT EAT OR INHALE. HARMFUL.
- AS SKIN IRRITATION MAY OCCUR, PLEASE WEAR PROTECTIVE GLOVES.
- RISK OF RUPTURE. KEEP BELOW 40℃ AND OUT OF DIRECT SUNLIGHT.
- FLAMMABLE. KEEP AWAY FROM HEAT AND FIRE.
- DO NOT SPRAY TOWARDS PEOPLE.
- KEEP OUT OF REACH OF CHILDREN AND VULNERABLE PEOPLE.
